Publications

Published Refereed Journal Articles

1.      Markey, E., R. Vercellino, B. J. Limb, M. Pisciotta, J. Huyett, S. Garland, M. Abarr, P. Psarras, D. R. Herber, J. C. Quinn, and T. M. Bandhauer (2024). “Economic impact of thermal energy storage on natural gas power with carbon capture in future electricity markets.” International Journal of Greenhouse Gas Control, Article In Press.

2.      Anderson, C., Z. Gao, M. Hanchak, and T. M. Bandhauer (2024). “Experimental and Computational Investigation of Flow Boiling in A 52 µm Hydraulic Diameter Microchannel Evaporator with Inlet Restrictions and Heat Spreading.” ASME Journal of Heat and Mass Transfer, 1-43, Paper No: HT-23-1366.

3.      Braun, R. J., G. Floerchinger, N. P. Sullivan, T. Vincent, R. Danforth, T. M. Bandhauer, S. Garland, D. Olsen (2023). “Development Progress of a 70% Efficient Hybrid SOFC-I.C. Engine Hybrid System for Stationary Applications up to 1 MW.” ECS Transactions, 111(6): 669.

4.      Cassada, N., C. Anderson, L. Kubicek, D. Hobby, C. Frye, S. Baxamusa, J. Kotovsky, K. Jackson, I. Ladner, and T. M. Bandhauer (2023). “SiC Microchannel Heat Sinks for High Heat Flux Dissipation of 1 kW/cm2.” IEEE Transactions on Components, Packaging and Manufacturing Technology, 13(5), 655-665.

5.      Hobby, D., J. Hoke, J. Fair, R. Deri, J. Kotovsky, and T.M Bandhauer (2023). “Power and Thermal Management SWaP Analysis for Generic, Mobile Directed Energy Platforms.” Journal of Directed Energy, 7: 146-162.

6.      Grauberger, B. M., G. M. Cole, C. A. Robbins, J. C. Quinn, T. Tong, and T. M. Bandhauer (2023). “Viability of Waste Heat Capture, Storage, and Transportation for Decentralized Flowback and Produced Water Treatment.” Applied Energy, 330: 120342.

7.      Cole, G. A.,  C. A. Robbins, B. M. Grauberger, S. Garland, T. Tong, T. M. Bandhauer, and J. C. Quinn (2022). “Optimization of Mobile Oil and Gas Produced Water Treatment Unit Deployment Logistics to Achieve Economic Feasibility.” Resources, Conservation, and Recycling, 181: 106249.

8.      Limb, B., E. Markey, R. Vercellino, S. Garland, M. Pisciotta, P. Psarras, D. R. Herber, T. Bandhauer, and J. C. Quinn (2022). “Economic Viability of Using Thermal Energy Storage for Flexible Carbon Capture on Natural Gas Power Plants.” Journal of Energy Storage, 55(D): 105836.

9.      Grauberger, A., D. Young, and T. M. Bandhauer (2022). “Off-design performance of an organic Rankine-vapor compression cooling cycle using R1234ze(E).” Applied Energy, 321: 119421.

10.  Grauberger, A., D. Young, and T. M. Bandhauer (2022). “Experimental Validation of an Organic Rankine Cycle Directly Coupled to a Vapor Compression Cooling Cycle using Low GWP Refrigerant R1234ze(E).” Applied Energy, 307: 118242.

11.  Robbins, C., X. Du, T. H. Bradley, J. C. Quinn, T. M. Bandhauer, S. A. Conrad, K. H. Carlson, and T. Tong (2022). " Beyond Treatment Technology: Understanding Motivations and Barriers for Wastewater Treatment and Reuse in Unconventional Energy Production." Resources, Conservation & Recycling, 177: 106011.

12.  Hejase, C.; K. Weitzel, S. Stokes, B. Grauberger, R. Young, M. Arias-Paic, M. Kong, S. Chae, T. M. Bandhauer, T. Tong, D. Herber, S. Stout, A. Miara, S. Huang, A. Evans, P. Kurup, M. Talmadge, A. Kandt, J. Stokes-Draut, J. Macknick, T. Borch, D. Dionysiou (2022). “Opportunities for Treatment and Reuse of Agricultural Drainage in the U.S.” ACS ES&T Engineering, Accepted.

13.  Braun, R. J., G. Floerchinger, D. Wahlstrom, N. P. Sullivan, T. Vincent, R. Danforth, T. M. Bandhauer, D. Olsen, and B. Windom (2021). “Development of a High Efficiency, Low-Cost Hybrid SOFC/Internal Combustion Engine Power Generator.” ECS Transactions, 103(1): 221.

14.  Simon, J. R., and T.M. Bandhauer (2021). “Experimentally Validated Plate Frame Heat Exchanger Model.” International Journal of Refrigeration, 131: 604-614, https://doi.org/10.1016/j.ijrefrig.2021.08.003.

15.  Hollis, J., D. J. Sharar, and T. M. Bandhauer (2021). “Effect of Phase Change Material on Dynamic Thermal Management Performance for Power Electronics Packages.” Journal of Electronics Packaging, 143(4): 041111.

16.  Anderson, C., J. Richey, M. Fish, and T. M. Bandhauer (2021). “Peak Temperature Mitigation of a Multi-Microchannel Evaporator Under Transient Heat Loads.” Journal of Electronics Packaging, 143(4): 041104.

17.  Robbins, C. A., K. H. Carlson, B. M. Grauberger, T. M. Bandhauer, S. D. Garland, and T. Tong (2021). “Spatial Analysis of Membrane Distillation Powered by Waste Heat from Natural Gas Compressor Stations for Unconventional Oil and Gas Wastewater Treatment in Weld County, Colorado.” ACS ES&T Engineering, 1,2, 192-203.

18.  Hoke, J., B. E. Burk, J. Kotovsky, J. Hamilton, P. Fontejon, and T.M Bandhauer (2021). “High Flux Boiling Heat Transfer Enhancement using Triangular Shaped Vertical Walls in Two-Phase Microchannel Heat Exchangers.” Heat Transfer Research, 52(7): 1-16.

19.  Robbins, C. A., B. M. Grauberger, S. D. Garland, K. H. Carlson, S. Lin, T. M. Bandhauer, and T. Tong (2020). “On-Site Treatment Capacity of Membrane Distillation Powered by Waste Heat or Natural Gas for Unconventional Oil and Gas Wastewater in the Denver-Julesburg Basin.” Environment International, 145: 106142.

20.  Hobby, D., T. Walker, A. Rattner, C. Jacobsen, D. Sherrer, and T.M Bandhauer (2020). “Comparison of Experimental and Computational Heat Transfer Characterization of Water Jet Impingement Array with Interspersed Fluid Extraction.” Heat Transfer Engineering, 1-16.

21.  Braun, R. J., E. Reznicek, C. Cadigan, N. P. Sullivan, R. Danforth, T. M. Bandhauer, S. Garland, D. Olsen, B. Windom, and B. Schaffer (2019). “Development of a Novel High Efficiency, Low Cost Hybrid SOFC/Internal Combustion Engine Power Generator.” ECS Transactions, 91(1): 355-360.

22.  Bevis, T., B. Burk, J. Hoke, J. Kotovsky, J. Hamilton, and T.M Bandhauer (2019). “Flow Boiling in a High Surface Area Microchannel Array for High Flux Laser Diode Cooling.” Heat Transfer Research, 50(14): 1417-1436.

23.  Burk, B., T. P. Grumstrup, T. A. Bevis, J. Kotovsky, T. M. Bandhauer (2019). “Computational examination of two-phase microchannel heat transfer correlations with conjugate heat spreading.” International Journal of Heat and Mass Transfer, 132: 68-79.

24.  Young, D., S. Gibson, and T. M. Bandhauer (2018). “Working Fluid Selection and Technoeconomic Optimization of a Turbocompression Cooling System.” Journal of Thermal Science and Engineering Applications, 10(6): 061017-1 to 061017-13

25.  Paudel, A., and T. M. Bandhauer (2018). “Technoeconomic analysis of waste heat recovery systems for Wet-Cooled Combined Cycle Power Plants.” Applied Thermal Engineering, 143: 746-758.

26.  Garland, S., J. Noall, and T. M. Bandhauer, (2018). “Experimentally Validated Model of a Turbo-Compression Cooling System for Power Plant Waste Heat Recovery.” Energy, 156(1): 32-44.

27.  Adler, J., and T. M. Bandhauer (2017). “Performance of a High Temperature Diesel Engine.” Journal of Energy Resources Technology, 139(6): 062203-1 to 062203-13.

28.  Westhoff, K., and T. M. Bandhauer (2016). “A Multi-Functional Electrolyte for Lithium-Ion Batteries: Part I. Non-Boiling Electrochemical Performance.” Journal of the Electrochemical Society, 163(9): A1903-A1913.

29.  Westhoff, K., and T. M. Bandhauer (2016). “A Multi-Functional Electrolyte for Lithium-Ion Batteries: Part II. Boiling Electrochemical Performance.” Journal of the Electrochemical Society, 163(9): A1914-A1919.

30.  Bandhauer, T. M., T. Fuller and S. Garimella (2015). "Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies: Part I. Side Cooling." Journal of the Electrochemical Society, 162(1): A125-A136.

31.  Bandhauer, T. M., T. Fuller and S. Garimella (2015). "Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies: Part II. Edge and Internally Cooling." Journal of the Electrochemical Society, 162(1): A136-A148.

32.  Bandhauer, T. M., S. Garimella , and T. F. Fuller (2014). "Temperature Dependent Electrochemical Heat Generation in a Commercial Lithium-Ion Battery." Journal of Power Sources, 247(1): 618-628.

33.  Bandhauer, T. M., and S. Garimella (2013). "Passive, Internal Thermal Management System for Batteries using Microscale Liquid-Vapor Phase Change." Applied Thermal Engineering, 61: 756-769.

34.  Bandhauer, T. M., T. F. Fuller, and S. Garimella (2011). "A Critical Review of Thermal Issues in Lithium-Ion Batteries." Journal of the Electrochemical Society, 158(3): R1-R25.

35.  Agarwal, A., T. M. Bandhauer, and S. Garimella (2010). "Measurement and Modeling of Condensation Heat Transfer in Non-Circular Microchannels." International Journal of Refrigeration, 33(6): 1169-1179.

36.  Bandhauer, T. M., A. Agarwal, and S. Garimella (2006). "Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels." Journal of Heat Transfer, 128(10): 1050-1059

Refereed Proceedings/Transactions

1.      Amyx, I., C. Anderson, N. Cassada, D. Funaro, C. Frye, S. Baxamusa, J. Kotovsky, K. Jackson, and T. M. Bandhauer (2024). “High Heat Flux Thermal Managment using CuW Microchannel Heat Sinks and FC3283.” 22nd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 28th – 31st, Denver, CO.

2.      Anderson, C., C. Lewinsohn, and T. M. Bandhauer (2024). “Transient Thermal Buffer for Microchannel Flow Boiling Using Gallium Phase Change Material.” 22nd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 28th – 31st, Denver, CO.

3.      Siegel, M., E. Malloy, J. Huyett, T. M. Bandhauer, A. Salvi, and N. R. Roberts (2024). “Economic and Environmental Assessment of Heat Pump Technology for Greenhouse Gas Emissions Reduction in Steam Production.” 22nd Paper TFEC-2024-50722, Proceedings of the 9th Thermal and Fluid Engineering Conference, Corvalis, OR.

4.      Mitchel, L., S. Garland, D. Olsen, B. Windom,  and T. M. Bandhauer (2024). “High Efficiency Air Delivery System for Solid Oxide Fuel Cell Power Generation.” 22nd Paper TFEC-2024-50390, Proceedings of the 9th Thermal and Fluid Engineering Conference, Corvalis, OR.

5.      Salvi, A., T. M. Bandhauer, N. R. Roberts, E. Malloy, M. Siegl, J. Huyett, D. Joekes, and A. Stark (2024). “Technoeconomic analysis of electrified boiler technologies to decarbonize industrial steam.” High-Temperature Heat Pump Symposium, January 23rd to 24th, Copenhagen, DE.

6.      B. Limb, E. Markey, R. Vercellino, J. Huyett, S. Garland, M. Pisciotta, P. Psarras, E. Meuleman, N. Fine, M., Abarr, D. R. Herber, J. C. Quinn, and T. Bandhauer (2022). “Evaluating the Economic Viability of NGCC-SWITCC: Natural Gas Combined Cycle System with Integrated Thermal Storage and Carbon Capture.” 16th International Conference on Greenhouse Gas Control Technologies, GHGT-16, 23rd-27th, October 2022, Lyon, France.

7.      R. Vercellino, E. Markey, B. J. Limb, M.D. Pisciotta, J. Huyett, S. Garland, T. Bandhauer, J.C. Quinn, P. Psarras, and D.R. Herber (2022). “Control Co-Design Optimization of Natural Gas Power Plants With Carbon Capture and Thermal Storage.” In ASME 2022 International Design Engineering Technical Conferences, DETC2022-90021, St. Louis, MO, USA, Aug 2022.

8.      Miguel Valles, Daniel B. Olsen, Todd Bandhauer, Zachary Swartwout, and  Bret Windom, “Simulation of a high-efficiency engine fueled by dilute anode tail-gas”, Western States Section of the Combustion Institute Meeting, Stanford University, Stanford, CA, March 21–22, 2022.

9.      Zachary Swartwout, Todd Bandhauer, Bret Windom, Shane Garland, Robert Braun, and Daniel B. Olsen, “Optimizing Efficiency of an SI Engine Fueled by Simulated Exhaust Anode Tail-gas”, Western States Section of the Combustion Institute Meeting, Stanford University, Stanford, CA, March 21–22, 2022.

10.  Brandi M. Grauberger, Garrett M. Cole, Cristian A. Robbins, Jason C. Quinn, Tiezheng Tong, and Todd M. Bandhauer1 (2022). “Feasibility of Waste Heat Capture, Storage, and Transportation for Utilization in Decentralized Produced Water Treatment”, Paper TFEC-2022-41231, Proceedings of the 7th Thermal and Fluid Engineering Conference, Las Vegas, NV.

11.  Braun, R. J., G. Floerchinger, D. Wahlstrom, N. P. Sullivan, T. Vincent, R. Danforth, T. M. Bandhauer, D. Olsen, and B. Windom (2021). “Development of a High Efficiency, Low Cost Hybrid SOFC/Internal Combustion Engine Power Generator.” ECS Meeting Abstracts, Volume MA2021-03, 17th International Symposium on Solid Oxide Fuel Cells (SOFC-XVII) July 18, 2021 - July 23, 2021.

12.  Garland, S., and T. M. Bandhauer, (2020). “Experimental Performance of a Turbo-Compression Cooling System Operating under Power Plant Conditions.” Paper TFEC-2020-32367, Proceedings of the 5th Thermal and Fluid Engineering Conference, New Orleans, LA.

13.  Simon, J. R., and T. M. Bandhauer, (2020). “Optimization of Plate Frame Evaporator for a Standard Vapor Compression Cycle.” Paper TFEC-2020-32428, Proceedings of the 5th Thermal and Fluid Engineering Conference, New Orleans, LA.

14.  Padhi, G., A. Balu, A., S. Garland, T. M. Bandhauer, D. Olsen, and B. Windom, “Combustion Modelling and Simulation of Dilute Syngas Fuels in a CFR Engine”, Western States Section of the Combustion Institute, Albuquerque, New Mexico, October 14–15, 2019.

15.  Balu, A., T. M. Bandhauer, B. Windom, S. Garland, R. Braun, D. Olsen, “Operation of a SI Engine Fueled by Simulated Exhaust Anode Tail-gas from a SOFC”, Western States Section of the Combustion Institute, Albuquerque, New Mexico, October 14-15, 2019.

16.  Countie, M., B. Windom, T. Bandhauer, S. Garland, R. Braun, and D. Olsen, “Predictive Modeling of a Spark Ignition SOFC Anode Tailgas Engine”, Western States Section of the Combustion Institute, Albuquerque, New Mexico, October 14-15, 2019.

17.  Balu, A., M. Castro, G. Padhi, T. M. Bandhauer, B. Windom, S. Garland, R. Braun, and D. Olsen, “Optimization and Simulation of a CFR Engine Fueled by Dilute Anode Tail-Gas.” Paper ICEF2020, Proceedings of the ASME 2020 Internal Combustion Engine Division Fall Technical Conference, Denver, CO, November 1-4, 2020.

18.  Young, D., N. Roberts, and T. M. Bandhauer, (2019). “Performance analysis and Optimization of a Waste Heat Driven Turbo-Compression System at Varying Heat Sink Temperatures.” Paper PRTEC-24184, Extended Abstracts of The Second Pacific Rim Thermal Engineering Conference, Maui, HI.

19.  S. Garland, D. Young, J. Simon, A. Rattner, and T. M. Bandhauer, (2019). “Performance Comparison between ORVC and Absorption Technologies over a Range of Ambient Conditions.” Paper PRTEC-24185, Extended Abstracts of The Second Pacific Rim Thermal Engineering Conference, Maui, HI.

20.  Simon, J., and T. M. Bandhauer, (2019). “Evaluation of Heat Transfer Correlations for Compact Plate and Frame Heat Exchangers.” Paper TFEC-2019-28123, Proceedings of the 4th Thermal and Fluid Engineering Conference, Las Vegas, NV.

21.  Grauberger, A., and T. M. Bandhauer, (2019). “Technoeconomic Analysis of Tri-Generation in Computer, Electronics, and Electrical Equipment Manufacturing” Paper TFEC-2019-28122, Proceedings of the 4th Thermal and Fluid Engineering Conference, Las Vegas, NV.

22.  Garland, S., D. Young, and T. M. Bandhauer, (2019). “Comparison Technique for Thermodynamic Performance of Heat Activated Cooling Systems” Paper TFEC-2019-27594, Proceedings of the 4th Thermal and Fluid Engineering Conference, Las Vegas, NV.

23.  Hobby, D., T. Walker, A. Rattner, C. Jacobsen, D. Sherrer, and T. M. Bandhauer (2018). “Comparison of Experimental and Computational Heat Transfer Characterization of Water Jet Impingement Array with Interspersed Fluid Extraction.” 16th Micro and Nano Flows Conference, Atlanta, GA.

24.  Hobby, D., D. Sherrer, C. Jacobsen, and T. M. Bandhauer, (2018). “Thermal Performance of Micro-Jet Impingement Device with Parallel Flow, Jet-Adjacent Fluid Removal.” Paper ICNMM2018-7664. Proceedings of 16th International Conference on Nanochannels, Microchannels, and Minichannels, Dubrovnik, Croatia.

25.  Hoke, J., J. Kotovsky, P. Fontejon, J. Hamilton, and T. M. Bandhauer (2018). “Heat Transfer Enhancement in Compact Phase Change Microchannel Heat Exchangers for High Flux Laser Diodes.” Paper ICNMM2018-7665. Proceedings of 16th International Conference on Nanochannels, Microchannels, and Minichannels, Dubrovnik, Croatia.

26.  Paudel, A., and T. M. Bandhauer, (2018). “Techno-economic Study of Waste Heat Recovery Strategies for Natural Gas Combined Cycle Power Plants.” Paper TFEC-2018-21619, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

27.  Young, D., and T. M. Bandhauer, (2018). “Technoeconomic Optimization of Turbo-compression Cooling Systems Driven by Engine Coolant Waste Heat.” Paper TFEC-2018-21605, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

28.  Paudel, A., J. Richey, and T. M. Bandhauer, (2018). “Determining the Apparent Cost of Water for Thermoelectric Power Plants.” Paper TFEC-2018-21609, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

29.  Garland, S., A. Grauberger, J. Simon, D. Young, K. Eisemann, R. Fuller, J. Noall, J. Shull, R. Sami, M. Reinke, L. Gabbey, and T. M. Bandhauer, (2018). “Experimental Investigation of a Waste Heat Driven Turbo-Compression Chiller.” Paper TFEC-2018-21617, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

30.  Gibson, S., D. Young, and T. M. Bandhauer (2017). “Technoeconomic Optimization of Turbocompression Cooling Systems.” Paper IMECE2017-70934, International Mechanical Engineering Congress and Exposition, Tampa, FL.

31.  Garland, S., T. M. Bandhauer, and J. Noall (2017). “Dry Air Turbo-Compression Cooling.” Paper TFEC-IWHT2017-18302, Proceedings of the 2nd Thermal and Fluid Engineering Conference, Las Vegas, NV.

32.  Paudel, A., and T. M. Bandhauer, (2017). “Simulation of NGCC Power Plant at Elevated Temperatures.” Paper TFEC-IWHT2017-18345, Proceedings of the 2nd Thermal and Fluid Engineering Conference, Las Vegas, NV.

33.  Westhoff, K., and T. M. Bandhauer (2016). “Multi-Functional Electrolyte for Thermal Management of Lithium-Ion Batteries.” Paper 2016-59460, Proceedings of the 14th Fuel Cell Science, Engineering, and Technology Conference, Charlotte, NC.

34.  Bandhauer, T. M., and S. Garland (2016). “Dry Air Turbo-Compression Cooling.” Paper 2016-59152, Proceedings of the ASME 2016 Power and Energy Conference, Charlotte, NC.

35.  Bevis, T., and T. M. Bandhauer (2016). “High Heat Flux Boiling Heat Transfer for Laser Diode Arrays.” Paper ICNMM2016-7947, Proceedings of ICNMM2016.Washington, DC.

36.  Bandhauer, T. M., A. Agarwal, and S. Garimella (2005). “Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels.” Proceedings of ICMM2005 Toronto, ON.

37.  Garimella, S., A. Agarwal, and T. M. Bandhauer (2005). “Channel Size Based Measurement Techniques for Condensation Heat Transfer Coefficients in Mini- and Micro-Channels.” Proceedings of IMECE2005 Orlando, FL.

38.  Garimella, S. and T. M. Bandhauer (2001). “Measurement of Condensation Heat Transfer Coefficients in Microchannel Tubes.” Proceedings of IMECE2001 New York, NY.

Issued Patents

1.      Bandhauer, T. M., D. N. Young, S. D. Garland, A. M. Grauberger, J. R. Simon, N. R. Roberts, S. Colosimo, Ultra efficient turbo-compression cooling systems, patent number 11,466,907 B2, issued October 11, 2022.

2.      Braun, R., T. Bandhauer, D. Olsen, B. Windom, High Efficiency Solid Oxide Fuel Cell – Internal Combustion Engine Hybrid Power System, patent number 11,145,880, issued October 12, 2021.

3.      Sherrer, D. L., C. R Jacobsen., D. R. Hobby, and T. M. Bandhauer, Cooling apparatus and methods of use, patent number 10,533,809, issued January 14, 2020.

4.      Bandhauer, T. M., and T. P. Grumstrup, Ultra-efficient turbo-compression cooling, patent number 10,294,826 , issued May 21, 2019.

5.      Bandhauer, T. M., Multi-functional electrolyte for thermal management of lithium-ion batteries, patent number 10,128,530, April 16, 2018.

6.      Bandhauer, T. M., Multi-functional electrolyte for thermal management of lithium-ion batteries, patent number 9,947,961, August 3, 2017.

7.      Baumann, T. F., J. H. Satcher, Jr., J. C. Farmer, T. Bandhauer, Adsorption cooling system using metal organic frameworks, patent number 11,786,883, issued October 17, 2023.

8.      Baumann, T., J. H. Satcher Jr., J. C. Farmer, and T. M Bandhauer, Adsorption cooling system using carbon aerogel, patent number 11,000,823, issued May 11, 2021.

9.      Baumann, T., J. H. Satcher Jr., J. C. Farmer, and T. M Bandhauer, Adsorption cooling system using metal organic frameworks, patent number 10,994,258, issued May 4, 2021.

10.  Bandhauer, T. M., R. J. Deri, J. W. Elmer, J. Kotovsky, and S. Patra, High flux diode packaging using passive microscale liquid-vapor phase change, patent number 9,768,584, September 19, 2017.

11.  Bandhauer, T. M., and J. C. Farmer, Battery management systems with thermally integrated fire suppression, patent number 9,704,384, July, 11 2017.

12.  Bandhauer, T. M., and J. C. Farmer, Li-ion battery thermal runaway suppression system using microchannel coolers and refrigerant injections, patent number 9,490,507, November 8, 2016.

13.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 9,413,017, issued August 9, 2016.

14.  Farmer, J. C., and T. M. Bandhauer, Battery management system with distributed wireless sensors, patent number 9,267,993, February 23, 2016.

15.  Farmer, J. C., and T. M. Bandhauer, Energy storage management system with distributed wireless sensors, patent number 9,209,501, December 8, 2015.

16.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 8,691,462, issued April 4, 2014.

17.  Krause, C. L., K. H. Nguyen, B. Balasubramanian, Y. Lin, J. Valensa, M. Reinke, M. G. Voss, and T. M. Bandhauer, Process and apparatus for thermally integrated hydrogen generation system, patent number 7,964,176, issued June 2, 2011.

18.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 7,858,256, issued December 28, 2010.

19.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,520,908, issued April 21, 2009.

20.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,520,907, issued April 21, 2009.

21.   Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,494,516, issued February 24, 2009.

22.   Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent numbers 7,494,518, issued February 24, 2009.

Pending Patents

1.      Todd M Bandhauer, Nickolas Roberts, Ashwin Salvi, and Addison Stark, Air source heat pump system and method of use for industrial steam generation, patent application number: 18324066, September 21, 2023.

2.      Todd M Bandhauer, Daniel Herber, Braden Limb, Jason Quinn, Shane Garland, Ethan Markey, Roberto Vercellino, Synergistic heat pumped thermal storage and flexible carbon capture system, patent application number: 18034469, December 7, 2023.

3.      Todd M. Bandhauer, David R. Hobby, and Zachary H. Gilvey, Jet impingement cooling systems and related methods of cooling high heat flux devices, patent application number: 17759799, March 2, 2023.

4.      Miles Abarr, Todd Bandhauer, Daniel Herber, Braden Limb, Joe Huyett, Jason Quinn, Ethan Markey, and Roberto Vercellino, Synergistic heat pumped thermal storage and flexible carbon capture system, patent application number: PCT/US2022/047763, October 25, 2022.

5.      T. Bandhauer and N. Roberts, Modular High-Performance Turbo-Compression Cooling, patent application number: PCT/US2022/044325, September, 21, 2022.

6.      Todd M. Bandhauer, Nickolas Roberts, Ashwin Salvi, and Addison Stark, Air source heat pump system and method of use for industrial steam generation, patent application number: PCT/US2022/072937, June 14, 2022.

7.      Todd Bandhauer, Daniel Herber, Braden Limb, Jason Quinn, Shane Garland, Ethan Markey, Athul Sundarrajan, and Roberto Vercellino, Synergistic heat pumped thermal storage and flexible carbon capture system, patent application number: PCT/US2021/072129, October 29, 2021

8.      Todd M. Bandhauer, David R. Hobby, and Zachary H. Gilvey, Jet impingement cooling devices, systems, and methods, patent application number: PCT/US2021/015521, January 28, 2021.

9.      Kotovsky, J., S. H. Baxamusa, C. D. Frye, I. S. Ladner, T. M. Spinka, D. J. Funaro, D. R. Hobby, C. D. Anderson, T. Bandhauer, System and Method for Laser Diode Array Having Integrated Microchannel Cooling, patent application number: 20220329048, April 9, 2021.

10.  Bandhauer, T. M., D. N. Young, S. D. Garland, A. M. Grauberger, J. R. Simon, N. R. Roberts, S. Colosimo, Ultra efficient turbo-compression cooling systems, Application number: 20210156597, May, 27, 2021.

11.  Sherrer, D. L., C. R Jacobsen., D. R. Hobby, and T. M. Bandhauer, Cooling apparatus and methods of use, patent application 20200011620, January 9, 2020.

12.  Bandhauer, T. M., Multi-functional electrolyte for thermal management of lithium-ion batteries, patent application 20180233774, August 16, 2018.

13.  Bandhauer, T. M., Multi-functional electrolyte for thermal management of lithium-ion batteries, patent application 20170346134, November 30, 2017.

14.  Bandhauer, T. M., T. P. Grumstrup, and D. R. Hobby, Method and Apparatus for Cooling Integrated Circuits, patent application 20170250123, August 31, 2017.

15.  Bandhauer, T. M., and T. P. Grumstrup, Ultra-efficient turbo-compression cooling, patent application 20170045272, February 16, 2017.

16.  Milkie, J., T. M. Bandhauer, A. Salvi, A. Stark, N. Roberts, J. Paulman, E. Boyd, R. Fuller (2023). Flexible High-Temperature, High-Efficiency Industrial Steam Heat Pump. 63566-702.101. Submitted March 27, 2023.

17.  Baumann, T. F., J. R. Satcher, J. C. Farmer, and T. M. Bandhauer, Adsorption cooling system using metal organic frameworks, patent application 20210299633, September 30, 2021.

18.  Bandhauer, T. M., R. J. Deri, J. W. Elmer, J. Kotovsky, and S. Patra, High flux diode packaging using passive microscale liquid-vapor phase change, patent application 20160315445, October 27, 2016.

19.  Bandhauer, T. M., Thermally integrated concentrating solar power system with a fluidized solid particle receiver, patent application 2015345480, March 4, 2014.

20.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent application 20140186729, July 3, 2014.

21.  Bandhauer, T. M., and J. C. Farmer, Battery management systems with thermally integrated fire suppression, patent application 20130316198, November 28, 2013.

22.  Farmer, J. C., and T. M. Bandhauer, Energy storage management system with distributed wireless sensors, patent application 20130314242, November 28, 2013.

23.  Farmer, J. C., and T. M. Bandhauer, Battery management system with distributed wireless sensors, patent application 20130314094, November 28, 2013.

24.  Bandhauer, T. M., and J. C. Farmer, Li-ion battery thermal runaway suppression system using microchannel coolers and refrigerant injections, patent application 20130312947, November 28, 2013.

25.  Baumann, T. F., J. R. Satcher, J. C. Farmer, and T. M. Bandhauer, Adsorption cooling system using carbon aerogel, patent application 20130283847, October 31, 2013.

26.  Baumann, T. F., J. R. Satcher, J. C. Farmer, and T. M. Bandhauer, Adsorption cooling system using metal organic frameworks, patent application 20130283846, October 31, 2013.

27.  Yin, J., M. J. Wilson, S. B. Memory, S. J. Collier, and T. M. Bandhauer, Refrigeration system having heat pump and multiple modes of operation, patent application 20080302113, December, 11, 2008.

28.  Wilson, M. J., S. B. Memory, J. Yin, J. P. Wattelet, S. J. Collier, K. Traeger, and T. M. Bandhauer, Heat exchange system for vehicles and method of operating the same, patent application 20080245503, October 9, 2008.

29.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent application 20060251940, November 9, 2006.

30.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent application 20060251939, November 9, 2006.

31.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent application 20060251934, November 9, 2006.

32.  Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent application 20060248799, November 9, 2006.

33.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050241232, November 3, 2005.

34.  Bandhauer, T. M., M. G. Voss, N. Siler, M. McGregor, and M. J. Reinke, Fuel humidifier and pre-heater for use in a fuel cell system, patent application 20050221137, October 6, 2005.

35.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050217180, October 6, 2005.

36.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050217179, October 6, 2005.

37.  Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050178063, August 18, 2005.

Theses and Dissertations

  1. E.J. Markey (2022). “Economic impact of thermal energy storage on natural gas power with carbon capture in future electricity markets.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA, Summer 2022.

  2. A.M. Grauberger (2022). “Experimental investigation of an advanced organic Rankine cycle vapor compression chiller.” Ph.D. Dissertation, Colorado State University, Fort Collins, CO, USA. Spring 2022.

  3. D.R. Hobby (2022). “Generalized pressure drop and heat transfer correlations for jet impingement cooling with jet adjacent fluid extraction.“ Ph.D. Dissertation, Colorado State University, Fort Collins, CO, USA. Spring 2022.

  4. N.R. Roberts (2021). “Modeling and design of a power boosted turbo-compression cooling system.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2021.

  5. S. Colosimo (2021). “Waste heat driven cooling at beef processing facilities.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2021.

  6. Z.H. Gilvey (2021). “Investigation of liquid cooling on M9506A high density Keysight AXIe chassis.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2021.

  7. J. R. Hollis (2021). “Effect of phase change material on dynamic thermal management performance for power electronics packages.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2021.

  8. J.J. Richey (2020). “Transient experimentation and modeling of a multi-microchannel evaporator.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2020.

  9. J. Hoke (2020). “Heat transfer enhancements in two-phase microchannel heat exchangers for high heat flux electronics.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2020.

  10. J.R. Simon III (2019). “Plate frame and bar plate evaporator model validation and volume minimization.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2019.

  11. L. Giugliano (2019). “Technoeconomic analysis of a steam generation system with carbon capture.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2019.

  12. D.N. Young (2018). “Technoeconomic optimization and working fluid selection for an engine coolant driven turbo-compression cooling system.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  13. A. Paudel (2018). “A techno-economic study on the waste heat recovery options for wet cooled natural gas combined cycle power plants.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  14. B.E. Burk (2018). “A computational examination of conjugate heat transfer during microchannel flow boiling using finite element analysis.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  15. S.D. Garland (2018). “Waste heat driven turbo-compression cooling.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2018.

  16. J. E. Adler (2017). “Waste heat recovery from a high temperature diesel engine.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2017.

  17. K. A. Westhoff (2016). “A multi-functional electrolyte for lithium-ion batteries.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2016.

  18. T.A. Bevis (2015). “High heat flux phase change thermal management of laser diode arrays.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2015.